E-3 Series Condensate Return
The E-3 Series jet vacuum condensate return units quickly collect and return condensate to the boiler feed unit using specifically designed pressures and flows. This vacuum unit comes with an accumulator tank and a top-mounted hurling tank. Pumping action is controlled by the water level inside the accumulator tank. An integral float device is used to turn the pump(s) on and off while vacuum pumps circulate water to and from the hurling tank. As water and air pass through a jet-type exhauster, it creates a powerful vacuum that helps remove air from the system, allowing steam to travel longer runs and providing quicker warm-up times.
Overview
- Cast iron or carbon steel receivers
- Available from 7.5 gpm to 150 gpm
- Pressure ranges from 10 psi to 60 psi
Capacity
- 5,000 to 100,000 sq. ft. EDR
Literature
E-3 Series Features
- Fast air removal allows for smaller piping sizes
- Cast iron or 3/16″ thick carbon steel tank with broad range of size options
- Durable impeller designed for smooth and efficient water passage
- Customizable control panels with multifunction capability and Building Management System integrations
- Standard mechanical seals capable of handling temperatures up to 250°F
- Condensate units come standard with float switch or mechanical alternator
- Boiler feed units come standard with float-operated makeup valves; solenoid valves optional
- Various flows and pressures designed to meet the strictest of specifications
E-3 Jet Vacuum Specifications
- Water capacities available from 7.5 gpm to 150 gpm
- Pressure ranges from 10 psi to 60 psi
- CFM ranges from 2.6 to 36 @ 51/2″ Hg vacuum
- Motors ranging from 1/3 hp to 10 hp available in 115, 208, or 230 single phase or 208, 230, or 460 three phase, 3,500 RPM
E-3 Liquid Ring Specifications
- Water capacities available from 7.5 gpm to 150 gpm
- Pressure ranges from 10 psi to 60 psi
- CFM ranges from 23 to 150
- Vacuum from 51/2″ Hg to 15″ Hg
- Motors ranging from 1/3 hp to 10 hp available in 115, 208, or 230 single phase or 208, 230, or 460 three phase, 3,500 RPM (Liquid-ring vacuum pump/ motor assembly—TEFC only)