C-5 Series Vacuum Condensate Return
The C-5 Series vacuum condensate return units quickly collect and return condensate to the boiler feed unit using specifically designed pressures and flows. This vacuum unit comes with one compartmentalized tank made up of one hurling chamber and one accumulator chamber. Pumping action is controlled by the water level inside the accumulator tank. An integral float device is used to turn the pump(s) on and off while vacuum pumps circulate water to and from the hurling tank. As water and air pass through a jet-type exhauster, it creates a powerful vacuum that helps remove air from the system—allowing steam to travel longer runs and providing quicker warm-up times.
Overview
- 3/16″ thick carbon steel receiver tank
- Simplex and duplex units
- Pump capacities to 97.5 gpm
- Discharge pressures of 20, 30, and 40 psi
Capacity
- 5,000 to 65,000 sq. ft. EDR
Literature
C-5 Series Features & Specifications
- Fast air removal allows for smaller piping sizes
- Compartmentalized 3/16″ thick carbon steel tank
- Durable impeller designed for smooth and efficient water passage
- Customizable control panels with multifunction capability and Building Management System integrations
- Standard mechanical seals capable of handling temperatures up to 250°F
- Condensate units come standard with a float switch or mechanical alternator
- Boiler feed units come standard with float-operated makeup valves; solenoid valves optional
- Various flows and pressures designed to meet the strictest of specifications
- Simplex and duplex units available
- Pump capacities to 97.5 gpm
- Discharge pressures of 20, 30, and 40 psi
- Air capacities range from 2.6 to 36 cfm
- Motors ranging from 1/3 hp to 10 hp available in 115, 208, or 230 single phase or 208, 230, or 460 three phase, 3,500 RPM